
Properties
The spraying direction can be adjusted in the range of 50 degrees as needed.
[Metal type]
•
Withstands pressure design from 1/8 "to 3/4" in pipe connection size. • Use UT-S303 (stainless steel S 303) At pressure below 15 MPa, UT-B (brass) lower than 4 MPa
[Plastic type]
• Light weight, high sealing performance The direction of the spray can be adjusted while spraying (up to 0.3 MPa).
• Use UT-FRPP at pressure below 1 MPa (at room temperature).
Caution for both types:
• Do not use under hammer conditions. Water or water pressure changes suddenly
• For use with the KB and KKBP injectors, other types of UT Ball Joint are required. Ask with us for details.
Applications
• The nozzle can be aligned precisely after connecting to the pipe.
• In the event that it is necessary to change the direction of the large spray, depending on the use of the nozzle, such as cleaning and blowing air
The spraying direction can be adjusted in the range of 50 degrees as needed.
[Metal type]
•
Withstands pressure design from 1/8 "to 3/4" in pipe connection size. • Use UT-S303 (stainless steel S 303) At pressure below 15 MPa, UT-B (brass) lower than 4 MPa
[Plastic type]
• Light weight, high sealing performance The direction of the spray can be adjusted while spraying (up to 0.3 MPa).
• Use UT-FRPP at pressure below 1 MPa (at room temperature).
Caution for both types:
• Do not use under hammer conditions. Water or water pressure changes suddenly
• For use with the KB and KKBP injectors, other types of UT Ball Joint are required. Ask with us for details.
Applications
• The nozzle can be aligned precisely after connecting to the pipe.
• In the event that it is necessary to change the direction of the large spray, depending on the use of the nozzle, such as cleaning and blowing air